Инструкция panasonic bl c1ce

инструкция panasonic bl c1ce
Set [Permit access from guest users] or [Permit access from guest users (mobile only)] on the Security: Administrator page (see page 52) to allow access from guest users. ZoneMinder does not log a sensible error message if the access privileges or credentials are incorrect, it just crashes. Threshold The detection level exceeds the setting is threshold when motions are displayed. Note See Getting Started for local and Internet access setup.


Now customize the name of a clipboard to store your clips. Page 38 Operating Instructions Note • Some wireless devices do not support the WEP 152 bit encryption. • The camera supports only open system authentication. If the wireless router or access point is set to shared key authentication, set it to auto or open system. Pressing the FACTORY DEFAULT RESET button resets the camera to factory default. If you lose your user name and password, use this button to reset the camera. Setting Personal • (Camera) URL Your Account • Link Click [OK]. • When finished, «Success!» is displayed. • The new settings are saved.

Suitable for use with all internet-enabled cell phones. Some phones may allow viewing only on port 80, and some may not support password authentication. Frame Rate» option, which is set on the Video Streaming page. Set [Permit access from guest users] or [Permit access from guest users (mobile only)] on the Security: Administrator page (see page 53) to allow access from guest users. Wireless home security cameras from Panasonic beam their images directly to a recording device inside your home. The reset button is situated on the side of the camera and clearly marked “FACTORY DEFAULT RESET”. Step 3 The LED on the front of the camera will flash red, then go off, then flash red for a few times as it resets and reboots itself.

Похожие записи:

Comments are closed, but trackbacks and pingbacks are open.